|
Aquatrack™
An innovative, modular multichannel measuring device for water analysis.
Measure – display – control – record: four tasks, one solution. Modular multichannel measuring device for liquid analysis with integrated controller and paperless recorder. |
Measuring
- pH or redox value, electrolytic conductivity, resistance of highpurity water, temperature, disinfecting variables such as free chlorine, total chlorine, chlorine dioxide, ozone, hydrogen peroxide and peracetic acid as well as the flow rate quantity:
- It provides a central platform for displaying and further processing the corresponding sensor signals.
- The device can measure and manage up to ten parameters simultaneously. Frequency inputs (counters) are available for flow rate measurements.
Displays
A 5.7" color screen with touch function is used both to display all parameters and to operate and adjust the device. An operating philosophy that uses plain text makes a manual practically unnecessary. Customers can select from a total of 30 user languages including Russian and Chinese, using the language library which can also be expanded. This makes the device ideally suited for international use.
A 5.7" color screen with touch function is used both to display all parameters and to operate and adjust the device. An operating philosophy that uses plain text makes a manual practically unnecessary. Customers can select from a total of 30 user languages including Russian and Chinese, using the language library which can also be expanded. This makes the device ideally suited for international use.
Control
In addition to numerous alarm, limit value or time-controlled switching functions, up to four higher-order loops can be defined simultaneously in Aquatrack™. Sophisticated control algorithms are used for P, PI, PD and PID control.
In addition to numerous alarm, limit value or time-controlled switching functions, up to four higher-order loops can be defined simultaneously in Aquatrack™. Sophisticated control algorithms are used for P, PI, PD and PID control.
Recording
Another highlight is the integrated paperless recorder for data recording. Analog and binary data is recorded and displayed on the screen in temporal sequence. The data is saved in a tamper-proof format which makes it possible to meet official record-keeping requirements. Data can be read with a PC program or conventional USB stick and further processed with a separate software program.
Another highlight is the integrated paperless recorder for data recording. Analog and binary data is recorded and displayed on the screen in temporal sequence. The data is saved in a tamper-proof format which makes it possible to meet official record-keeping requirements. Data can be read with a PC program or conventional USB stick and further processed with a separate software program.
Operation
Operation and display of Aquatrack™ are centrally combined in a color TFT touchscreen. The screen is based on a resistive operating principle, which makes it possible to operate even with gloves on. An additional protective film eliminates reflections on the screen and provides enhanced protection against environmental influences and mechanical damage.
An operating and status line appears in the bottom part of the screen. Softkeys are available to open submenus or other display screens. The date and time are also displayed. All display and operating levels are protected by user rights (code words). In this way graded access is possible to operating, calibration or parameter levels depending on the user. This increases operational security and reliability and prevents improper operation and tampering.
Various view screens are available in measuring and control mode. Measured values can be displayed in an overview with 1, 2 and 4 channels. Auxiliary values and relay status indications are also displayed. The user can freely assign which values are displayed where in the basic programming of the device. It is also possible to load a system diagram (bitmap) and integrate measured value displays and relay status indications into it. Realistic representations of the application can be created in this way to facilitate rapid status control of plants or machines.
Operation and display of Aquatrack™ are centrally combined in a color TFT touchscreen. The screen is based on a resistive operating principle, which makes it possible to operate even with gloves on. An additional protective film eliminates reflections on the screen and provides enhanced protection against environmental influences and mechanical damage.
An operating and status line appears in the bottom part of the screen. Softkeys are available to open submenus or other display screens. The date and time are also displayed. All display and operating levels are protected by user rights (code words). In this way graded access is possible to operating, calibration or parameter levels depending on the user. This increases operational security and reliability and prevents improper operation and tampering.
Various view screens are available in measuring and control mode. Measured values can be displayed in an overview with 1, 2 and 4 channels. Auxiliary values and relay status indications are also displayed. The user can freely assign which values are displayed where in the basic programming of the device. It is also possible to load a system diagram (bitmap) and integrate measured value displays and relay status indications into it. Realistic representations of the application can be created in this way to facilitate rapid status control of plants or machines.